Technical characteristics:

• Temperature light and Humidity control.
• Temperature range: +5°C/+50°C with Humidity OFF.
• Temperature range: +15°C/+50°C with Humidity ON.
• Construction in stainless steel as per AISI 304 18/8 both inner and outer case.
• High density insulation through foamed-in-place polyurethane Stainless steel frontal door with lock and key.
• Transparent inner door.
• Refrigerating Device located in the upper part of the chamber with C.F.C. free air cooled device, inneer ventilation to uniform temperature.
• Heating through Resistors easy to be replaced.
• Humidity Device through hot steam Generator, water condense.
• Tray positioned below the chamber (to be filled with treated water).
• Tank with floating switch included .

Lighting device positioned inside n.2 side doors through:

• 2 inspection side Doors (outside in painted steel and inside in stainless steel).
• Lighting device through n.12 ‘36 watt’ white Fluorescent Lamps (n.6 inside left door + n.6 inside right one).
• Lux details: 12 lamps ON = direct light 5500 LUX – spread light 20000 LUX.
• 8 lamps ON = direct light 3800 LUX – spread light 14600 LUX.
• 4 lamps ON = direct light 1900 LUX – spread light 8160 LUX.
• Thermic insulation with n.2 side termopan fixed wall (no access. To be used for inspection only).
• Fan on each side door to cool down lamps.

Control Panel Board completed with:

• Temperature Digital Microprocessor Thermo-Regulator Ascon M33107, auto-tuning P.I.D. control 4-20 mA signal re-transmission for Recorder connection
• Humidity Digital Microprocessor Thermo-Regulator Ascon M33107, auto-tuning P.I.D. control 4-20 mA signal re-transmission for Recorder connection -Min/max safety thermostats with visible alarms -24/H week Timer to program light.
• Switch for direct or programmed lighting
• Mains Switch
• Refrigerating Device Switch -Humidity Device Switch (ON/OFF) -Humidity Safety Lamp (Lack of Water in Tank) -Safety Lamps
• Fuses

V. 230/1 Hz. 50
CEI 62-25 Electric device – CE Marking

 Mod. 700CFLU
Capacity lt.546 Int. Dim.: mm.600 x 650 x 1400H Ext.Dim.: mm. 89*0 x 900 x 2070H N° 4 Shelves (grid easy to move cm.53×59) N° 4 Wheels/Castors Kit (n.2 with stop block)

Mod. 1400CFLU
Capacity lt.1183
n.2 frontal Doors Int. Dim.: mm.1300 x 650 x 1400H Ext.Dim.: mm. 1600 x 900 x 2070H N° 8 Shelves (grid easy to move cm.53×59) N° 4 Wheels/Castors Kit (n.2 with stop block)

options:

• Walk-in models
• ∅ 35 Hole/Port -Temperature/Humidity Programmers
• Temperature/Humidity Protocols
• IQ/OQ Protocols and Protocol Tests
• Video Recorder with colour Display ‘Memograph M RSG40’ with n. 4/8/12 channels
• FDA 21CFR Part 11 user administration